The popularity of milling machines does not stop at large manufacturers but also spreads to the world of engineers. This is because milling machines allow complex parts to be created in a way that the average 3D printer cannot. With this guide, we'll approach you with the basics of milling machines, including applications, operating principles, and important features as you prepare to invest in a machine of your own. This article will help you possess enough knowledge to confidently use the milling machine effectively

Notes for using milling machines safely

1.First, you need to carefully check the milling machine's switch

When approaching any electrical device or hand-held power tool, you need to carefully consider the electrical cord. This is the "artery" that provides the power and energy necessary for the machine to operate smoothly. As for the manufacturing and construction industry, tools often carry considerable power and pose many risks if not used carefully.

Before connecting the machine cord to the electrical outlet, the first thing to do is carefully check the machine's power switch. Make sure it is "Off". This not only ensures safety but also prevents unpredictable and unwanted situations when the machine is connected to the power source.

In addition, when replacing the milling bit for the machine, it is important that you unplug it from the electrical outlet. This is an absolute safety measure. Removing the power source will ensure that the machine cannot suddenly operate, thereby protecting the safety of yourself and your colleagues.

Remember, care in using power tools is more important than ever. Complying with safety guidelines will help minimize potential hazards and provide a safer and more productive work environment.

2.Tighten the rotary bit installed into the milling machine properly

Many people often encounter the situation of installing the rotary bit too close to the screw, leading to the rotating bit shaking and not being able to rotate at the desired center of gravity. The main cause of this problem usually lies in the bottom of the swivel nose, the structure is not designed to be completely flat. When installed too closely, these parts will interfere with each other, reducing the machine's performance.

How to properly install the rotary nose is extremely simple. Just create a small gap between the rotary bit and the screw, the machine will operate smoothly and effectively on the material. Even though it is a small detail, if you pay attention to this, the work will be done more effectively, saving time and effort.

Furthermore, cleaning the milling machine after each use is extremely important. Make sure that dust, foreign objects or residues do not stick to the details of the screw, creating favorable conditions for installing the rotary bit. You can use tools such as soft brushes or dust blowers to clean quickly and effectively. This will ensure that the machine always operates stably and safely during use.

3. Pay attention when you screw the milling machine

There is nothing wrong with screwing a wood milling machine in the traditional way, using both hands to squeeze the wrench and tighten. However, this method often takes a lot of time and effort. Therefore, we want to share a small tip to help you save time and be extremely effective when screwing a wood milling machine.

First, adjust the position of the two wrenches so that they create an angle of about 60 degrees with each other. Then, just use one hand to squeeze the wrench, you will be able to turn the screw more easily and quickly than ever. This method brings optimal efficiency and saves effort, helping you complete your work smoothly.

4. When starting the milling machine, you need to push it in the right direction

Perhaps some of you have experienced situations like the image below when using a wood milling machine.

Often, the main cause lies in the way you push the machine, which is not compatible with the rotation direction of the milling blade, which causes the machine to slip and lose control. As a result, the wooden surface often becomes rough and loses its natural beauty.

When the wood milling machine operates, the milling blade will rotate clockwise. Therefore, to ensure maximum efficiency, you need to push the machine so that the tip of the milling blade contacts the piece of wood. In a simpler and easier to remember way, you just need to push the machine from left to right on the piece of wood. Done correctly, the machine will operate with maximum stability, resulting in a smoother and more attractive wood surface than ever.

5. Choosing a suitable power outlet is also an important note

Usually, the power cord of a handheld wood milling machine is about 2 meters long, so it is only suitable for milling pieces of wood up to 2 meters long. However, if the power outlet is not long enough, you may encounter a situation where the cord slips, causing work interruption and unnecessary danger. So, measure the material carefully and choose an electrical outlet of the appropriate length to ensure the job takes place effectively and safely for yourself.

An important thing to keep in mind when unplugging the power plug is to hold the plug correctly, not the wire above. This action will prevent the cord from breaking due to long-term use, while minimizing the risk of danger to the user.

6. Finally, read the instructions carefully before using

Whether using a CNC milling machine, mini milling machine or handheld milling machine, it is extremely important to read the accompanying instruction manual carefully before use. This will help you master the characteristics and features of each type of machine, thereby making effective use of the machine at work. In addition, reading the instructions also helps you master safety notes when performing construction.

Furthermore, you should also equip yourself with protective equipment such as earmuffs, goggles, etc. to ensure the work process takes place safely and ensures your health. This is the most important thing that we should not ignore.

Which milling machine models should you choose? Where to distribute reputable milling machines?

Wood milling machines can be used to perform a variety of tasks such as edge milling, flat milling, engraving, recess milling, groove milling, etc. in a simple and effective way. On the market today, there are many brands providing quality wood milling machines, including Maktec. This is a product line known for its high quality and reasonable price of the Makita brand, bringing absolute trust to users. EMIN is pleased to introduce to you three outstanding Maktec wood milling machines in their price range.

MAKTEC MT362 Milling Machine (1,650W)

MAKTEC MT362 Milling Machine with a powerful capacity of up to 1,650W, allows handling wood milling tasks easily and effectively. The machine's milling depth reaches 12mm or 1/2 inch, allowing for flexible adjustment. Deep operation of milling.

Cooling parameters range from 0 to 60mm (equivalent to 0 to 2-3/8 inches), allowing the cooling level to be customized according to specific work needs. The base measures 160x148mm (6-5/16"x5-7/8"), providing large space to ensure stability and precision during operation.

With a no-load speed of up to 22,000 rpm, the machine is capable of operating strongly and efficiently. The overall dimensions of the machine are 284x148x300mm (11-1/8"x5-7/8"x11-3/4"), allowing flexible and convenient operation.

The machine has a net weight of 5.5kg (12.2lbs), facilitating movement and use in different situations. The 2.0m (6.6ft) long power cord provides flexibility in connecting and using the machine, making it convenient and time-saving.

MAKTEC MT370 milling machine (530W)

The MAKTEC MT370 milling machine with a capacity of 530W, is an option worth considering for basic wood milling tasks. The machine's squeeze jaw is capable of accommodating milling shanks up to 6mm or 1/4 inch in diameter, facilitating milling tasks with flexibility and variety.

The machine operates at a no-load speed of up to 35,000 rpm, providing power and efficiency during milling tasks. With a total height of 199mm (7-7/8 inches), the machine has a moderate size, facilitating operation and control.

The net weight of the device is only 1.6kg (3.5lbs), providing portability and convenience during use.

The 2.0m (6.6ft) long power cord provides flexibility and convenience in connecting and using the machine. This saves time and provides a convenient usage experience.

Makita 3600H milling machine

The Makita 3600H milling machine has a powerful capacity of up to 1500W, providing the ability to handle wood milling tasks with high efficiency. The machine's viewing ability reaches 12mm, allowing milling work to be performed with high precision. With a no-load speed of up to 24,000 rpm, the machine is capable of operating strongly and quickly.

The machine base has a diameter of up to 160mm, providing ample space to ensure stability and accuracy during operation. The overall size of the machine is 210mm, making operation flexible and convenient. The machine has a net weight of 4.3kg, providing portability and convenience during use.

The 5.0m long power cord provides flexibility and convenience in connecting and using the machine. This saves time and provides a convenient usage experience.

Conclude:

Above are the shares we want to bring to you. If you are looking for genuine Maktec milling machines, wood milling machines,... at the most reasonable prices, please contact EMIN now. Our team of consultants will support you dedicatedly and enthusiastically.